|
|
|
| |
|
| |
| |
|
AMG Flex™ Duct
• The inner core is coated with Agion® Antimicrobial Technology which resists mold-fungus growth
• Johns Manville Formaldehyde-Free Insulation
• Effective Against a Broad Spectrum of Bacteria
• Available in R–6.0 and R–8.0
• Galvanized Metal Core Reinforcing
• Oversized Core to Fit on Collars and Register Boxes
• Weather Resistant Bag Packaging
|
|
Installation
Instructions
(1.7mb) |
Rip Stop Silver Jacket Flexduct
“Rip-Stop” Silver Jacket Fllex Duct has a metallic, polyester-vapor barrier
with special rip-stop scrim reinforcement. Standard diameters are available
in 3” to 22” with 12.5’, 25’ or 50’ per package.
Available in R-4.2, R-6.0 and R-8.0
• Galvanized metal core reinforcing
• Weather resistant packaging available in box or bag
• Easy-to-carry package
• Oversized core to fit on collars and register boxes
|
|
Installation
Instructions
(1.7mb) |
UV Inhibited Black Jacket Flexduct
The QuietFlex® UV-Inhibited Black Jacket Flex Duct has a UV-inhibited
polyethylene vapor barrier.
Available in R-4.2, R-6.0 and R-8.0
• Galvanized metal core reinforcing
• Weather resistant packaging available in box or bag
• Easy-to-carry package
• Oversized core to fit on collars and register boxes
|
|
Installation
Instructions
(1.7mb) |
Manufactured Housing
The QuietFlex® Mobile Home Flex Duct has an extra heavy-duty, UV-inhibited, polyethylene-vapor barrier and complies with HUD standards for outdoor use with mobile homes.
Available in R-4.2, R-6.0 and R-8.0
• Galvanized metal core reinforcing
• Weather resistant packaging available in box or bag
• Easy-to-carry package
• Oversized core to fit on collars and register boxes
|
|
|
6' & 7' Collared Silver Jacket Flexduct
Our 6’ and 7’ collared Silver Jacket Flex Duct has a metallic, polyester-vapor barrier with special rip-stop scrim reinforcement. It is constructed with universal male / female collars that are factory attached at each end. Standard diameters are available in 4” to 20” for R-value 4.2, 6 and 8. These are packaged 2 pieces per box.
|
|
| |
|
Insulated Sleeve
Insulated Sleeve is ideal for use in insulating new or existing hard pipe.
It increases the efficientcy of warm or cool air traveling through the duct
and reduces condensation build-up.
• Available in R-4.2, R-6.0 and R-8.0
• Reinforced metallic polyester-vapor barrier or in polyethylene vapor barrier
• Standard length of 5 feet
• One starter cap included in each box
|
|
Installation
Instructions
(1.7mb) |
Uninsulated Flex Connector
• Galvanized metal core reinforcing
• Easy-to-carry package
• Oversized core to fit on collars and register boxes
|
|
Installation
Instructions
(1.7mb) |
Clothes Dryer Vent Transition Duct
• Easy to install boxed universal flexible dryer duct
• Fire resistant heavy duty 4-ply aluminum foil laminate construction
• Fits most commonly used electric and gas dryers
• Fits in tight places where rigid metal ducting will not work
• Close wire frame spacing allows tight bends without collapsing
• Meets all the requirements of UL 2158A
|
|
|
|
|
|
|
|
